Alcohol instructions for non preheater types of Petromax lanterns

BriteLyt Lamps

BriteLyt, Inc.
9516 Lake Dr.
New Port Richey, FL. 34654
USA
Ph: 727-856-9245
Fax: 813-675-0984

BriteLyt Multi-Fuel Lanterns, Stoves, & Petromax Lanterns
Home Of the World Famous Multi-Fuel Lantern

Lighting Instructions for lanterns w/out preheaters

Video demonstration Geniol or Petromax Swiss military surplus

Video demonstration Methanol Ethanol Lantern

Add pressure in tank (part #118) using part #6. Pressurize to 2 to 3 on the gauge ( part #149).(If you are using alcohol fuels in tank, then pump to 1 on the gauge(part #149). See photos below for using pump system:

Petromax lanterns and BriteLyt lanterns

PHOTO BELOW: Add alcohol into bottle (part #67) & fill alcohol cup (part #35).

PHOTO BELOW: Light alcohol in cup (part #35), with a match. Allow preheating.

PHOTO BELOW: Preheat cup (part #35). Allow fuel to burn. You may be required to fill cup 2-6 times(for all fuels, except alcohol fuels). When using alcohol fuels, then you can preheat 1-2 times using cup (part #35).

PHTOTO BELOW: Turn part #111 (knob), from 12:00 O'clock(up) to 6:00 O'clock(down). Lantern should light. If not, then add alcohol to cup (part #35), and preheat again.

Add pressure as needed see below photo:

Britelyt, EZ-Cook , EZ-Pump,O-Ring pump system and stove are the registered trademarks and Patents # 6,439,223, # 6,688,877,# 6,863,526,# 6,887,071 # 7,568,911

of Diana Draper. All other trademarks are properties of their respective owners.